Roof Inspection in Northglenn

Northglenn’s Roof Inspector Since 2010: Free Estimates, Trusted Credentials

Northglenn’s Front Range climate is hard on roofs. Heavy snow loads, hailstorms, freeze-thaw cycles, and intense UV exposure all take a toll. It’s often in ways that aren’t visible from the ground. At Awalt Construction, we combine local knowledge with professional-grade tools to give you a clear, honest picture of your roof’s condition before small problems become expensive ones.

Routine inspections catch what you can’t see: missing shingles, cracked flashing, clogged gutters, and early signs of moisture intrusion. Identifying these issues early preserves your home’s structural integrity and helps keep heating and cooling costs in check. We serve both residential and commercial properties, and we offer free estimates with no obligation.

Don’t wait for a leak to find the problem. Call us at (303) 647-4006 to schedule your Northglenn roof inspection.

Why Roof Inspections Matter in Northglenn

Northglenn roofs face a punishing cycle of weather stressors year-round. In winter, heat escaping through the roof melts accumulated snow, which refreezes along the cold eave edge and forms ice dams that force water under shingles and into the structure below. In summer, rooftop heat drives UV breakdown, accelerating granule loss on asphalt shingles and reducing their ability to shed water effectively.

A professional inspection identifies these stressors:

• Shingle wear and granule loss from UV exposure and temperature extremes
• Flashing weaknesses around chimneys, vents, and skylights caused by thermal expansion and contraction
• Gutter and downspout blockages that trap meltwater and rain, increasing ice dam and water intrusion risk

Colorado’s Front Range weather can shift fast, and every roof inspection in Northglenn we conduct accounts for recent storm activity, snowfall, and seasonal sun exposure. We also factor in guidance from the City of Northglenn building department so our repair and maintenance recommendations are grounded in local requirements, not just general best practices.

Our Roof Inspection Process

Since 2010, we’ve refined a thorough, multi-point inspection process built around the specific demands of Northglenn’s climate. As a GAF preferred installer, CertainTeed ShingleMaster roofing contractor, Owens Corning preferred contractor, and Tamko Pro Diamond contractor, our manufacturer relationships mean repair or replacement work following an inspection may qualify for enhanced warranty coverage. This distinction matters when post-inspection repairs begin.

What We Examine

Every inspection covers these key areas:

• Exterior Surface Scan: We examine shingles, metal roofing, tile, or flat membranes for cracks, buckling, or loose sections.
• Flashing & Seal Check: All roof penetrations are inspected, with special attention to vent pipes, chimneys, and skylights.
• Structural Inspection: We check soffits and fascia boards for rot or damage that could compromise overall support.
• Gutter & Drainage Review: We clear debris and verify downspout alignment to support proper water flow and help prevent standing water.
• Attic & Ventilation Assessment: Using infrared cameras and moisture meters, we detect hidden leaks, insulation gaps, and airflow issues that affect indoor comfort.

What You Receive Afterward

After the inspection, you receive a clear, itemized report with high-resolution photos, prioritized recommendations, and transparent cost estimates. You decide which repairs to address now and which can wait. That report is yours regardless of whether you choose us for follow-up work.

Because we also work on gutters, siding, windows, and exterior painting, our inspectors can flag related issues while on site. We’re not just evaluating shingles in isolation. We’re looking at how water moves off your roof, how it affects your walls and trim, and where the best long-term investments may be across your home’s full exterior envelope. We also inspect commercial properties and multi-family structures, including sloped and flat-roofed buildings, though those inspections typically take longer given roof size and complexity.

Credentials & Local Compliance Knowledge

We hold an A+ rating with the Better Business Bureau and manufacturer credentials that reflect consistent installation quality: GAF preferred installer, CertainTeed ShingleMaster roofing contractor, Owens Corning preferred contractor, and Tamko Pro Diamond contractor. These aren’t just designations. They can affect which warranty options may be available to you after an inspection surfaces the need for repairs or a full replacement.

We track updates from Adams County and the state of Colorado so any repair or replacement work following your inspection moves smoothly through permitting. Inspection reports that document compliance considerations, such as slope standards for snow loads or Class 4 impact-resistant shingle ratings relevant to Colorado’s Front Range, can also simplify conversations with your insurance carrier. When needed, we can coordinate documentation that supports insurance claims or future resale disclosures.

Common Questions

How Often Should I Schedule a Roof Inspection?

We recommend a professional inspection at least once a year, ideally in spring after winter’s freeze-thaw cycle. Schedule an additional inspection after severe storms or hail events to catch damage before it compounds.

Annual inspections can help newer roofs maintain manufacturer warranty requirements and help keep small issues from contributing to coverage problems. For older roofs or properties under mature tree canopy, more frequent visits make sense. Twice-yearly checks, in spring and fall, are a practical routine for high-exposure roofs and fit naturally into any home maintenance calendar.

Can I Inspect My Own Roof?

Basic DIY checks, such as looking for curled shingles or clearing gutter debris, are useful, but they can’t replace a professional evaluation. Climbing on a roof without proper safety training and equipment puts you at risk, and it’s easy to miss subtle signs of moisture damage, ventilation problems, or structural movement without specialized tools.

A professional inspection includes moisture meters, infrared cameras, and close-up evaluations at penetrations that most homeowners don’t have access to. That’s why most homeowners prefer to bring in a professional rather than attempt a full assessment on their own.

What If You Find Damage During the Inspection?

Our detailed report outlines each concern with photo documentation and clear priority levels. We can walk you through repair options, timelines, and costs so you can make informed decisions, whether you choose us for repairs or prefer another contractor.

When storm or hail damage is involved, we can also help you understand what information is useful when speaking with your insurance company, including storm dates and descriptions of affected areas. Clear photos and written documentation can give your claim a stronger foundation and help you plan any temporary protections if a larger repair is needed.

How Long Does an Inspection Take?

Most residential inspections are completed within 60 to 90 minutes, depending on roof size and complexity. Commercial buildings, multi-family properties, and homes with complex rooflines may require additional time to safely access each area and gather accurate information.

We always explain our process before we begin so you know what to expect, and we encourage you to share any leak history or comfort concerns upfront so we can focus extra attention on the areas that matter most.

Ready for a detailed assessment? Reach out at (303) 647-4006, and our team can guide you through every step.